Bissell Wash Pump Spot Clean Pro Heat MultiClean Carpet Washer 230v 1600054
by Bissell
Current price
£13.69
**Free UK Delivery (1-2 Days)**
Availability: Only 6 left in stock
Genuine Bissell SpotClean Wash Pump 230V
Brand new, genuine original replacement 230v wash pump for Bissell portable carpet and upholstery cleaners including the SpotClean range.
If your carpet cleaner powers on and has suction, but fails to spray water or cleaning solution from the handheld tool when you press the trigger, a worn or faulty wash pump is often the cause. Fitting this replacement pump restores proper water pressure and spray flow to get your cleaner working like new again.
Specification:
Part Number : 1600054
Part Type: Wash / Water Spray Pump
Voltage: 230V
When to replace:
No Water Spray: The machine turns on and has normal vacuum suction, but no water or solution comes out when pressing the handheld trigger (and you have already checked that the clean tank is seated properly and the spray nozzle isn't blocked).
Weak or Spluttering Flow: Water trickles weakly or pulses inconsistently despite a full clean tank and clear hose.
No Pump Sound or Buzzing: The pump stays completely silent or makes a loud humming/grinding noise without pumping water when the trigger is pressed.
Internal Water Leak: Water leaks from the underside of the main body rather than from the removable tanks or hose connections.
How to fit:
Safety First: Unplug the machine from the mains power supply and remove both water tanks before starting.
Access the Pump: Remove the outer casing screws to separate the housing and expose the internal motor and pump compartment.
Remove Old Pump: Take a quick photo of the wiring and hose layout for reference, then disconnect the electrical spade connectors and slide the inlet/outlet water hoses off the old pump.
Install New Pump: Push the water hoses firmly onto the replacement pump ports (securing any hose clips), reconnect the electrical terminals, and seat the pump back into its rubber mountings.
Reassemble & Test: Reattach the outer casing, fill the clean water tank, plug the unit back in, and hold the spray trigger for 10–15 seconds to prime the new pump.
Fits models:
BISSELL
Little Green Spot Clean 3698L
MultiClean Spot & Stain SpotCleaner 4720M
Spot Clean 3698E
Spot Clean 3698F
Spot Clean 3698G
Spot Clean 3698Y
Spot Clean 4720F
SpotClean 3698N
SpotClean ProHeat 36981
SpotClean ProHeat 36982
SpotClean ProHeat 36988
SpotClean Proheat 3698N
